Outdoor Rental LED Display Screens Installation Steps and Matters Should Pay Attention to

outdoor rental LED display screens

When we are providing LED screens for our customers, we find that some of our customers do not know how to install them. In addition, there are some matters we should pay attention to when installing them. As for outdoor rental LED display screens, the followings are the installation steps and matters we should pay attention to.

1.Installation step:

1). Put the DVI video card into the AGP sockets on the main board, then set up the drivers;

2). Put the data card into PDI socket (if there is data card);

3). Connect the DVI and AGP together.

4). Connect the controlling wire with serial port;

5). Connect the network wire

6). Check if the connections are right, then start to debugging.

When checking the connections, we should check the connections at the strong current part (the weak current part has been checked by the outdoor rental LED display screens suppliers during the production), the signal connection (the input and output directions of the system receiving card), the system connection. Also, we need to check the software on the computer to see if they have been installed rightly.

2. Matters should be payed attention to:

1).Since different outdoor LED screen rental service provider may use different installation method, so we should do it in strict accordance with the installation manual which your screen supplier provided to you.

2).The supplying electric power should in accordance with the screen’s request (normally 220V, 50Hz).

3).Install the LED screens in better environment to keep it working stable.

4).Make sure the ground connection is right.

In general, there are also some other aspects we should paid attention to. When installing the outdoor rental LED display screens, ask your LED screen rental service provider to give you professional advice if there is any trouble.